status-update¶

rbt status-update is used to create, edit, or delete status updates on a review request.

Status updates can be used by code checking tools, such as internal scripts, CI systems, or Review Bot, to communicate that code is being analyzed or to communicate the result of that analysis, usually in the form of a review.

This command makes it easy to integrate your own code checking or review request validation scripts with Review Board.

Usage¶

$ rbt status-update <subcommand> [options] 

This command provides several subcommands:

get
set
delete

Upgrading from RBTools 1.x or 2.x

RBTools 2 required that the get, set, or delete action be last. In RBTools 3 and up, it must be before any options.

The old form is supported in RBTools 3, but will be removed in RBTools 4.

rbt status-update get¶

This is is used to list all the status updates on a review request, or to display information on a particular status update.

It requires the -r/--review-request-id option, and can take a -s/--status-update-id to specify a particular status update.

Usage¶

$ rbt status-update get [options] 

Listing Status Updates¶

To list status updates, run rbt status-update get -r <review_request_id> without --status-update-id. For example:

$ rbt status-update get -r 123
reviewbot.17: <done-failure> cpplint: failed.
reviewbot.18: <done-success> GoTool: passed.
reviewbot.19: <done-success> ShellCheck: passed.

This information can also be returned in JSON form by using --json:

$ rbt status-update get -r 123 --json
{
    "status": "success",
    "status_updates": [
        {
            "description": "failed.",
            "extra_data": {
                "can_retry": true
            },
            "id": 180,
            "service_id": "reviewbot.17",
            "state": "done-failure",
            "summary": "cpplint",
            "timeout": 60
        },
        {
            "description": "passed.",
            "id": 181,
            "service_id": "reviewbot.18",
            "state": "done-success",
            "summary": "GoTool",
            "timeout": 60
        },
        {
            "description": "passed.",
            "id": 182,
            "service_id": "reviewbot.19",
            "state": "done-success",
            "summary": "ShellCheck",
            "timeout": 60
        }
    ]
}

If anything goes wrong, you’ll receive an error:

$ rbt status-update get -r 123 --json
{
    "errors": [
        "Something terrible happened and hopefully this explains why."
    ],
    "status": "failed"
}

Displaying a Status Update¶

rbt status-update get -r <review_request_id> -s <status_update_id> can be used to display information on a particular status update. For example:

$ rbt status-update get -r 123 -s 180
180  reviewbot.17: <done-failure> cpplint: failed.

This information can also be returned in JSON form by using --json:

$ rbt status-update get -r 123 -s 180 --json
{
    "status": "success",
    "status_updates": [
        {
            "description": "failed.",
            "extra_data": {
                "can_retry": true
            },
            "id": 180,
            "service_id": "reviewbot.17",
            "state": "done-failure",
            "summary": "cpplint",
            "timeout": 60
        }
    ]
}

If anything goes wrong, you’ll receive an error:

$ rbt status-update get -r 123 -s 180 --json
{
    "errors": [
        "Something terrible happened and hopefully this explains why."
    ],
    "status": "failed"
}

Options¶

-d, --debug¶

Displays debug output.

This information can be valuable when debugging problems running the command.

The default can be set in DEBUG in .reviewboardrc.

--json¶

Output results as JSON data instead of text.

The default can be set in JSON_OUTPUT in .reviewboardrc.

New in version 3.0.

Status Update Options¶

-s <id>, --status-update-id <id>¶: A specific status update to display.

rbt status-update set¶

This is used to create or modify a status update on a review request. It’s useful for custom CI, build, or code analysis integrations that need to report results on a review request.

Usage¶

$ rbt status-update set [options] 

Creating a Status Update¶

When creating a status update, you need to specify the following:

A service ID (--service-id) that uniquely identifies this category of status update (e.g., internal-code-checker.styles).
An initial summary (--summary) naming this status update (e.g., Code Compliance Checker).

Optionally, you may also want to specify:

A timeout in seconds (--timeout) before the status update is listed as having failed due to timeout.
A URL (--url) and accompanying link text (--url-text) for monitoring results.
A description (--description) shown beside the summary name conveying the current status (e.g., starting...).
A change ID (“Review Request Changed” box) to attach the status update to (--change-id).

For example:

$ rbt status-update set \
      -r 123 \
      --service-id internal-code-checker.styles \
      --summary "Code Compliance Checker" \
      --description "starting..." \
      --timeout 120 \
      --url https://ci.eng.example.com/codechecker/builds/12345/ \
      --url-text "Build Log"
234  internal-code-checker.styles: <pending> starting...

You can use --json to return a payload containing the information:

$ rbt status-update set \
      -r 123 \
      --service-id internal-code-checker.styles \
      --summary "Code Compliance Checker" \
      --description "starting..." \
      --timeout 120 \
      --url https://ci.eng.example.com/codechecker/builds/12345/ \
      --url-text "Build Log" \
      --json
{
    "status": "success",
    "status_updates": [
        {
            "description": "starting...",
            "id": 234,
            "service_id": "internal-code-checker.styles",
            "state": "pending",
            "summary": "Code Compliance Checker",
            "timeout": 120
        }
    ]
}

If anything goes wrong, you’ll receive an error:

$ rbt status-update set \
      -r 123 \
      --service-id internal-code-checker.styles \
      --summary "Code Compliance Checker" \
      --description "starting..." \
      --timeout 120 \
      --url https://ci.eng.example.com/codechecker/builds/12345/ \
      --url-text "Build Log" \
      --json
{
    "errors": [
        "Something terrible happened and hopefully this explains why."
    ],
    "status": "failed"
}

Modifying a Status Update¶

Eventually you’ll want to report a result for your status update, indicating if the checks have succeeded, failed, or triggered some kind of error. You may want to add a review, or link to some result.

To modify a status update, you’ll use rbt status-update set again, but you’ll specify -s/--status-update-id to indicate which status update you’re modifying.

You’ll probably want to specify some of the following:

The new state of the change (--state). This can be one of: pending, done-failure, done-success, error
The new description (--description) shown beside the summary name, conveying the new status (e.g., passed.)
A new URL (--url) and accompanying link text (--url-text) for the results.
A review with any failures (--review).

See Reporting Failed Results below.

For example, if successful:

$ rbt status-update set \
      -r 123 \
      -s 234 \
      --state done-success \
      --description "passed."
234  internal-code-checker.styles: <done-success> passed.

Or if checks found some problems to report:

$ rbt status-update set \
      -r 123 \
      -s 234 \
      --state done-failure \
      --description "failed." \
      --review results.json
234  internal-code-checker.styles: <done-failure> failed.

You can use --json to return a payload containing the information:

$ rbt status-update set \
      -r 123 \
      -s 234 \
      --state done-success \
      --description "passed." \
      --json
{
    "status": "success",
    "status_updates": [
        {
            "description": "failed.",
            "id": 234,
            "service_id": "internal-code-checker.styles",
            "state": "done-failure",
            "summary": "Code Compliance Checker",
            "timeout": 120
        }
    ]
}

If anything goes wrong, you’ll receive an error:

$ rbt status-update set \
      -r 123 \
      -s 234 \
      --state done-success \
      --description "passed." \
      --json
{
    "errors": [
        "Something terrible happened and hopefully this explains why."
    ],
    "status": "failed"
}

Reporting Failed Results¶

When reporting a done-failure result, you’ll want to include some information to help the owner of the change know what went wrong.

This can be done by generating a JSON file containing information on a review, and then passing that filename to --review. Any comments or text provided in this file will be filed on the review request, attached to the results of your status update.

The format of the file looks like:

{
    // Optional: Header/footer for the review.
    "review": {
        // Optional: Header text to display above the list of comments.
        "body_top": "<string>",

        // Optional: Footer text to display below the list of comments.
        "body_bottom": "<string>"
    },

    // Optional list of comments on diffs.
    "diff_comments": [
        {
            // Required: The ID of the file being reviewed
            "filediff_id": <int>,

            // Required: The 1-based line number for the comment.
            "first_line": <int>,

            // Optional: Set to true to open an issue.
            "issue_opened": true|false,

            // Required: The number of lines the comment should span.
            "num_lines": <int>,

            // Required: Text shown in the comment.
            "text": "<string>",

            // Required: Type of text formatting ("plain" or "markdown").
            "text_type": "plain|markdown"
        },
        ...
    ],

    // Optional list of general comments, not bound to a file or diff.
    "general_comments": [
        {
            // Required: Text shown in the comment.
            "text": "<string>",

            // Required: Type of text formatting ("plain" or "markdown").
            "text_type": "plain|markdown"
        },
        ...
    ]
}

Anything listed as optional can be omitted.

For example:

{
    "review": {
        "body_top": "Header comment"
    },
    "diff_comments": [
        {
            "filediff_id": 1,
            "first_line": 1,
            "issue_opened": true,
            "num_lines": 1,
            "text": "Adding a comment on a diff line",
            "text_type": "markdown"
        },
        {
            "filediff_id": 2,
            "first_line": 2,
            "issue_opened": true,
            "num_lines": 1,
            "text": "Adding a second diff comment",
            "text_type": "markdown"
        }
    ],
    "general_comments": [
        {
            "text": "Adding a general comment",
            "text_type": "markdown"
        }
    ]
}

Options¶

-d, --debug¶

Displays debug output.

This information can be valuable when debugging problems running the command.

The default can be set in DEBUG in .reviewboardrc.

--json¶

Output results as JSON data instead of text.

The default can be set in JSON_OUTPUT in .reviewboardrc.

New in version 3.0.

Status Update Options¶

-s <id>, --status-update-id <id>¶: Specifies which status update from the review request.

--review <file path>¶: JSON formatted file defining details of review(s) to add to status update.

--change-id <id>¶: The change to a review request which this status update applies to. When not specified, the status update is for the review request as initially published.

--description <text>¶: A user-visible description of the status update.

--service-id <service id>¶: A unique identifier for the service providing the status update.

--state <state>¶: The current state of the status update.

--summary <text>¶: A user-visible short summary of the status update.

--timeout <timeout>¶: Timeout for pending status updates, measured in seconds.

--url <url>¶: URL to link to for more details about the status update.

--url-text <url text>¶: The text to use for the --url link.

rbt status-update delete¶

This is used to delete a status update.

This may be useful if you’re playing around with the command. In production, once a status update is filed on a review request, it should only be resolved by updating the state, not deleting it.

Usage¶

$ rbt status-update delete [options] 

When deleting a status update, -s/--status-update-id is required.

For example:

$ rbt status-update delete -r 123 -s 234
Status update 234 has been deleted.

This information can also be returned in JSON form by using --json:

$ rbt status-update delete -r 123 -s 234 --json
{
    "status": "success"
}

If anything goes wrong, you’ll receive an error:

$ rbt status-update delete -r 123 -s 234 --json
{
    "errors": [
        "Something terrible happened and hopefully this explains why."
    ],
    "status": "failed"
}

Options¶

-d, --debug¶

Displays debug output.

This information can be valuable when debugging problems running the command.

The default can be set in DEBUG in .reviewboardrc.

--json¶

Output results as JSON data instead of text.

The default can be set in JSON_OUTPUT in .reviewboardrc.

New in version 3.0.

Status Update Options¶

-s <id>, --status-update-id <id>¶: Specifies which status update from the review request.

RBTools 4.x Documentation

status-update¶

Usage¶

rbt status-update get¶

Usage¶

Listing Status Updates¶

Displaying a Status Update¶

Options¶

Status Update Options¶

rbt status-update set¶

Usage¶

Creating a Status Update¶

Modifying a Status Update¶

Reporting Failed Results¶

Options¶

Status Update Options¶

rbt status-update delete¶

Usage¶

Options¶

Status Update Options¶